Table of Contents
Osteolysis and the Stryker Insert Recall
Stryker has recalled its ultra-high molecular weight polyethylene (UHMWPE) joint inserts twice in less than three years, once in December 2023 and again in July 2026. The recalled parts include knee inserts and patellas, hip liners and bipolar heads, and a smaller number of shoulder and elbow components.
For the 2026 recall, the FDA lists several problems from faster wear. Excessive wear debris is first on the list. The list also includes fragments of material breaking off, the insert cracking, and parts separating from each other.
Wear debris may sound minor next to a broken implant. It isn’t. Tiny particles of worn polyethylene, a plastic-like material, can set off an immune reaction that eats away the bone holding a joint replacement in place. Doctors call this osteolysis.
Here is how the problem behind the Stryker insert recall may connect to osteolysis, and what it can mean for patients.
Why the age of the polyethylene in the Stryker recall matters
The recalled inserts are made from ultra-high molecular weight polyethylene (UHMWPE). This tough, plastic-like material forms the smooth surface where the moving parts of a joint replacement meet.
According to Stryker’s recall notice, the raw polyethylene used to make these parts should be stored for less than five years before using it to manufacture the implant parts. Stryker says the recalled inserts were made from raw material stored longer than that. The FDA’s recall records say this polyethylene may have higher levels of oxidation.
Oxidation is a slow chemical breakdown. Oxygen reacts with the chemicals that give the plastic-like material its strength. Over time the material becomes more brittle and less able to handle the constant rubbing and pressure inside a joint.
How knee and hip inserts wear differently
The plastic-like material does not wear the same way in every joint.
In a knee replacement, the insert takes heavy, rolling and sliding forces each time the knee bends under load. Research on oxidized knee inserts found these forces can make the weakened material crack below the surface and peel away in layers. This is called delamination.
Delamination can leave visible pits and flakes in the insert. Over time the insert gets thinner until the knee feels loose or unstable. Most of the knee parts in the Stryker recalls are tibial inserts and patellas, including Scorpio, Duracon, PCA and Triathlon components. See which Stryker knee inserts were recalled.
In a hip replacement, the ball joint moves against the liner in a steady grinding motion. This tends to shed huge numbers of very fine particles. Those fine particles are the kind most likely to trigger osteolysis. The Stryker hip recalls include Trident liners, constrained liners, and UHR and System One bipolar heads. See which Stryker hip inserts were recalled.
How wear debris leads to osteolysis
As polyethylene wears down, it sheds tiny particles, far smaller than a grain of sand. The body sees these particles as something that doesn’t belong and tries to get rid of them.
The problem is that the body can’t break down polyethylene. So the immune system keeps reacting. Over time, that constant reaction starts to eat away at the healthy bone around the implant. Doctors call this osteolysis.
That bone is what holds a joint replacement in place. As it thins, the implant can loosen. Loosening is one of the most common reasons knee and hip replacements fail and need to be replaced. Metal-on-metal hips can also cause bone loss, but for different reasons. Learn about bone loss from metal-on-metal hips.
Osteolysis in your implant joint often has no symptoms
Osteolysis usually doesn’t hurt at first. Many people feel fine while bone loss slowly builds for months or even years. It often shows up on x-rays or other imaging before it causes any symptoms.
When symptoms do appear, it is often because the implant has started to loosen. Signs can include:
- New pain in a knee or hip that used to feel fine
- Pain when standing up or putting weight on the leg
- A joint that feels loose or unstable
- Clicking, grinding or a feeling that something has shifted
Other problems from Stryker insert wear
Osteolysis is not the only concern. In the 2026 Stryker insert recall, the FDA also warns that inserts may crack, break apart or separate from other parts of the implant. These problems can cause swelling, a joint that feels unstable, or sudden pain and trouble walking. Any of them can lead to revision surgery.
What osteolysis means for joint revision surgery
When an implant loosens, the usual fix is revision surgery to remove the worn parts and put in new ones. Bone loss makes this surgery harder because the surgeon has less healthy bone to work with. Recovery is often longer than it was after the first joint replacement, and it can be especially hard for older patients.
What this means if you have a recalled Stryker insert
Having a recalled Stryker implant insert does not mean you have osteolysis or will develop it. But if you notice new pain, swelling, or a loose feeling in your joint, talk with your orthopedic surgeon.
Why work with mctlaw
mctlaw has represented people with failed joint implants for decades. In 2008, our firm filed the first metal-on-metal hip lawsuit in the United States. Since then, our team has taken on almost all of the major orthopedics companies on behalf of patients whose implants wore out or failed early. Learn more about our firm. We invite you to meet our team and read what past clients say about working with us.
We understand how these recalls work and what it takes to build a strong claim. We will explain your options in plain language and walk you through whether your insert was part of the recall.
What happens when you contact mctlaw
When you call us, chat online, or fill out our form, you will talk with a member of our intake team. We will ask about your implant, your surgery, and how you are doing now. If it looks like you may have a claim, we will explain the next steps, including how we gather the information needed to confirm whether your implant was recalled. There is no pressure and no cost to talk with us.
If your surgeon has found bone loss around a Stryker knee or hip implant, or you have had or been told you need revision surgery, call 888.952.5242 or fill out the form on this page for a free case evaluation. You can also learn more about the Stryker polyethylene insert recall.
Frequently asked questions about the Stryker insert recall
Does a recalled insert need to be removed?
Not necessarily. Not every insert made from the recalled polyethylene will wear out early or cause problems, and neither recall told patients to have their implants removed.
When a surgeon finds enough wear or damage to recommend removing and replacing the implant, that revision surgery is what can lead to a legal claim. If you have had revision surgery, or your surgeon has recommended one, contact mctlaw for a free case evaluation.
How do I find out if my insert was recalled?
The recalls cover specific Stryker part and lot numbers, so the only way to know for sure is to match your implant to those records. You don’t have to figure this out on your own. Contact mctlaw and our team will help you find out whether your insert is part of the recall.
Can family members contact you about a loved one’s implant?
Yes. Family members often help look into a recall, especially during a hard surgery or recovery. You are welcome to contact us on their behalf.
Is there a deadline to file a claim?
Yes. Every state sets time limits for product liability claims, and the clock may start before you ever hear about a recall. Missing a deadline can end a claim before it starts. Contact mctlaw as soon as possible so our team can review your situation.
Does it cost anything to talk to mctlaw?
No. Your case evaluation is free, and there is no pressure or obligation.